Page 1 of 1
s
Posted: Mon Feb 03, 2014 2:15 am
by steve_carlose
a
Re: Out-of-the-Box (OOTB) in 3PAR7400
Posted: Mon Feb 03, 2014 4:40 pm
by Josh26
It's blogged pretty well here:
http://3cvguy.com/3par-storeserv-7000-step-by-step-installation-and-configuration-part-1/If you're looking for official documents, you won't find them, HP don't allow the OOB (or setup in general) to be done by end users.
Re: Out-of-the-Box (OOTB) in 3PAR7400
Posted: Tue Feb 04, 2014 5:49 pm
by Gakecs
Steve,
Just in case it helps since I was on a similar quest for information about the OOTB procedures... about 2 months after our initial "setup" session with the HP guys... I finally checked my system tasks... and lo and behold the OOTB stress test was hung. No performance issues or other problems, just a hung task. After running through a ton of research trying to figure out just what the test does... a talk with HP and a reboot cleared the hang.
Re: s
Posted: Thu Sep 11, 2014 7:24 am
by glanzmann
Hello,
we have two 7400 which have hanging ootb stress on 3.1.3 MU1. The tasks were running from the installation date 2 weeks ago. We rebooted the two 3PARs using and the hanging tasks are gone.
Code: Select all
stor-mr3-1 cli% showtask -d 1
Id Type Name Status Phase Step -------StartTime-------- -FinishTime- -Priority- ---User----
1 system_task OOTB_stress active 1/1 0/1 2014-08-28 12:29:24 CEST - n/a sys:3parsys
Detailed status:
2014-08-28 12:29:24 CEST Created task.
2014-08-28 12:29:24 CEST Updated Executing "OOTB_stress" as 3:9488
2014-08-28 12:29:24 CEST Updated Admitting new PDs...0 disks admitted
2014-08-28 12:29:24 CEST Updated
2014-08-28 12:29:25 CEST Updated Waiting for chunklet init to complete
2014-08-28 12:34:26 CEST Updated 189182 chunklets to clean or 54:59 to go
2014-08-28 12:39:27 CEST Updated 186060 chunklets to clean or 49:58 to go
Cheers,
Thomas