servicemag test relocate chunklet

Post Reply
badbird
Posts: 7
Joined: Wed Oct 23, 2013 12:54 am

servicemag test relocate chunklet

Post by badbird »

Dear All,

I try testing servicemag relocate chunklet in normal disk but it cannot resume, how can use servicemag resume chunklet back? Because just testing and the disk without replace, thanks.

Time : 2013-10-23 10:53:43 HKT
Severity : Informational
Type : CLI command executed
Message : {3paradm super all {{0 8}} -1 127.0.0.1 32450} {servicemag start -pdid 23} {}

Time : 2013-10-23 10:53:43 HKT
Severity : Informational
Type : 'servicemag start' operation has begun
Message : servicemag start -pdid 23

Time : 2013-10-23 10:53:43 HKT
Severity : Informational
Type : Component state change
Message : Magazine 1:11:0, Physical Disk 23 Normal (Servicing)

Time : 2013-10-23 13:12:01 HKT
Severity : Informational
Type : Disk state change
Message : pd 23 wwn 5000CCA02255581F changed state from notready to missing because disk gone event was received for this disk.

Time : 2013-10-23 13:12:01 HKT
Severity : Degraded
Type : Component state change
Message : Magazine 1:11:0, Physical Disk 23 Degraded (Missing, Servicing)

Time : 2013-10-23 13:12:11 HKT
Severity : Informational
Type : 'servicemag start' operation has completed
Message : servicemag start -pdid 23 – Succeeded


When I execute servicemag resume 1 11 and the pdid 23 returm from degraded to normal but reume failed.

CSDPRISIISAN01 cli% showpd -i
Id CagePos State ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType
23 1:11:0 normal 5000CCA02255581F HITACHI HCBRE0900GBAS10K KPWHY0TL 3P00 SAS Magnetic
------------------------------------------------------------------------------------------------

CSDPRISIISAN01 cli% servicemag status -d
Cage 1, magazine 11:
A servicemag resume command failed on this magazine.
The command completed at Wed Oct 23 13:48:05 2013.
The output of the servicemag resume was:
servicemag resume 1 11
... mag 1 11 already onlooped
... firmware is current on pd WWN [5000CCA02255581F] Id [23]
... checking for valid disks...
Failed --
Disk specified in the servicemag start -pdid option has not been replaced.
Please replace the correct disk.
servicemag resume 1 11 -- Failed





Best regards,

Chung
Post Reply