I/O module replacement
Posted: Mon Sep 11, 2023 8:16 am
Hi every,
HP_3PAR 7400c (v3.2.2)
The I/O Module in one of the drive enclosures must be replaced. (without support).
Is it hot procedure?
IOM DP1 - from node0 DP1
IOM DP2 - to IOM other shelf
What is the procedure before and after replacing the module?
Need to turn off the port on node via "controlport offline <node:slot:port>"?
Using "servicecage" with "-iom" before and after on/off SAS port on node?
Thanks in advance.
HP_3PAR 7400c (v3.2.2)
The I/O Module in one of the drive enclosures must be replaced. (without support).
Is it hot procedure?
IOM DP1 - from node0 DP1
IOM DP2 - to IOM other shelf
What is the procedure before and after replacing the module?
Need to turn off the port on node via "controlport offline <node:slot:port>"?
Using "servicecage" with "-iom" before and after on/off SAS port on node?
Thanks in advance.