Page 1 of 1
I heard 3.2.1 MU1 has been flagged with an issue anyone know
Posted: Wed Dec 03, 2014 1:38 pm
by hdtvguy
We were going to do 3.2.1 MU1 and were tald it has a warning that was just issued, but no further details were released. We cancelled deployment until we can get details.
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Wed Dec 03, 2014 1:44 pm
by Schmoog
I'm on 3.2.1 MU1 and have been running with no issues.
There was a critical patch released for an issue with region moves on a TDVV (Thin Dedupe VV), but they issued a patch (P04) that fixed the issue. HP contacted me about the critical patch just after thanksgiving, and I had them install it over the weekend (Saturday and sunday after thanksgiving). No node reboot required, completely non-disruptive.
That being said, since we don't have SSD, and don't use thin dedupe, there were no worries for us. I just had them do it so I didn't have to think about it.
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Wed Dec 03, 2014 1:46 pm
by RitonLaBevue
Well, P04 is the key to MU1.
It's about dedup and moving region/chunklets of VVs in vvset setted for dedup and... data corruption ^^
So, no dedup in MU1 without P04.
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Wed Dec 03, 2014 1:47 pm
by Schmoog
RitonLaBevue wrote:Well, P04 is the key to MU1.
It's about dedup and moving region/chunklets of VVs in vvset setted for dedup and... data corruption ^^
So, no dedup in MU1 without P04.
Spot on. Here's the link to the customer bulletin:
http://h20566.www2.hp.com/hpsc/doc/public/display?docId=c04514111&jumpid=em_alerts_us-us_Nov14_xbu_all_all_2286082_201212_storage_critical_010_9700
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Thu Dec 04, 2014 6:18 am
by hdtvguy
OK then I guess I will reschedule the install for after the new year.
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Sun Dec 07, 2014 7:50 am
by bajorgensen
Also have one array on 3.2.1 MU1 since the release day without issue.
But HP came and installed P04 immediatly when it was released.
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Mon Dec 08, 2014 6:16 pm
by Patrick
Did a couple of upgrades from 3.1.3 MU1 to 3.2.1 MU1 with P04 and notice a completely different issue with iSCSI.
shownet -d is some issues on the iSCSI interfaces
Code: Select all
Detailed Tcp stats on node 0
RtoAlgorithm: 1 RtoMin: 200
RtoMax: 120000 MaxConn: -1
ActiveOpens: 6717 PassiveOpens: 6768
AttemptFails: 33 EstabResets: 97
CurrEstab: 89 InSegs: 1111778630
OutSegs: 496370425 RetransSegs: 389274
InErrs: 0 OutRsts: 40
Detailed Tcp stats on node 1
RtoAlgorithm: 1 RtoMin: 200
RtoMax: 120000 MaxConn: -1
ActiveOpens: 39513 PassiveOpens: 77477
AttemptFails: 164 EstabResets: 41280
CurrEstab: 99 InSegs: 1105276422
OutSegs: 501448361 RetransSegs: 1165450
InErrs: 0 OutRsts: 6799
10 seconds later
Code: Select all
Detailed Tcp stats on node 0
RtoAlgorithm: 1 RtoMin: 200
RtoMax: 120000 MaxConn: -1
ActiveOpens: 6717 PassiveOpens: 6768
AttemptFails: 33 EstabResets: 97
CurrEstab: 89 InSegs: 1111782268
OutSegs: 496375134 RetransSegs: 389276
InErrs: 0 OutRsts: 40
Detailed Tcp stats on node 1
RtoAlgorithm: 1 RtoMin: 200
RtoMax: 120000 MaxConn: -1
ActiveOpens: 39513 PassiveOpens: 77477
AttemptFails: 164 EstabResets: 41280
CurrEstab: 99 InSegs: 1105280815
OutSegs: 501452729 RetransSegs: 1165505
InErrs: 0 OutRsts: 6799
The above is from a 2-node 7400, also seeing similar issues on a pair of 7200's though the counts are less (much smaller configs).
Just ran across the issue a few hours ago when the VM farm disconnected/reconnected half of the exported LUNs....definitely something is up.
Re: I heard 3.2.1 MU1 has been flagged with an issue anyone
Posted: Wed Dec 10, 2014 8:21 pm
by Schmoog
Fwiw we have had precisely zero issues with 3.2.1 mu1, but we run fc only (blech. The thought of iscsi makes me queasy)