Page 5 of 5
Re: 3PAR 7400 controller error
Posted: Sun Feb 09, 2014 3:22 am
by Richard Siemers
I suspect the OP lives in a country with severe trade restrictions imposed by U.S. and other nations, which explains why calling/getting support from HP is not an option. Steve what country is the broken 3PAR located in?
Re: 3PAR 7400 controller error
Posted: Sun Feb 09, 2014 5:00 am
by steve_carlose
is in Armenia
Re: 3PAR 7400 controller error
Posted: Mon Feb 10, 2014 11:32 am
by Richard Siemers
Are your VSP and Nodes on the same physical subnet so that Bootp/dhcp/pxe boot will work?
Re: 3PAR 7400 controller error
Posted: Sun Feb 16, 2014 1:44 am
by steve_carlose
Hello every body.
Finally my problem was solved.I changed the SSD drive
Best Regards
Re: 3PAR 7400 controller error
Posted: Thu Mar 06, 2014 5:46 pm
by Richard Siemers
Hello Steve -
What connection settings did you use to connect to the controller serial port?