Why can't I create a RAID 5 TPVV?
-
Gatorfreak
- Posts: 37
- Joined: Tue Nov 27, 2012 2:04 pm
Why can't I create a RAID 5 TPVV?
I have a RAID 5 CPG but when I create a TPVV it's RAID 1. If I create a Full provisioned VV then it's RAID 5. Can someone shed some light on this?
-
Richard Siemers
- Site Admin
- Posts: 1333
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: Why can't I create a RAID 5 TPVV?
Got some screenshots or text that can help diagnose?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
-
Gatorfreak
- Posts: 37
- Joined: Tue Nov 27, 2012 2:04 pm
Re: Why can't I create a RAID 5 TPVV?
The raid 5 CPG:
The raid 1 TPVV in the above CPG:
The raid 1 TPVV in the above CPG:
Re: Why can't I create a RAID 5 TPVV?
Are you using AO? because that would explain this.
The goal is to achieve the best results by following the clients wishes. If they want to have a house build upside down standing on its chimney, it's up to you to figure out how do it, while still making it usable.
-
Gatorfreak
- Posts: 37
- Joined: Tue Nov 27, 2012 2:04 pm
Re: Why can't I create a RAID 5 TPVV?
We don't have the AO software.
Re: Why can't I create a RAID 5 TPVV?
Quite frankly I don't understand one bit of the screenshots.
A copyspace with a setsize of 2, but it reports back raid 5?
The adminspace has a setsize of 3, but reports back as raid 1?
huh?
Could you click edit on the CPG, tick advanced settings, and make a screenshot of that?
A copyspace with a setsize of 2, but it reports back raid 5?
The adminspace has a setsize of 3, but reports back as raid 1?
huh?
Could you click edit on the CPG, tick advanced settings, and make a screenshot of that?
The goal is to achieve the best results by following the clients wishes. If they want to have a house build upside down standing on its chimney, it's up to you to figure out how do it, while still making it usable.
-
Gatorfreak
- Posts: 37
- Joined: Tue Nov 27, 2012 2:04 pm
Re: Why can't I create a RAID 5 TPVV?
Hope this helps...
- Attachments
-
- cpg2.JPG (28.66 KiB) Viewed 25591 times
Re: Why can't I create a RAID 5 TPVV?
raid5, setsize of 4 for the userspace.
if you create a new thinvv from this cpg, and also point the copyspace to this cpg, it must have a setsize of 4 and be raid 5 in any view imho.
will check my config tomorrow, see if it has the same abnormalities.
if you create a new thinvv from this cpg, and also point the copyspace to this cpg, it must have a setsize of 4 and be raid 5 in any view imho.
will check my config tomorrow, see if it has the same abnormalities.
The goal is to achieve the best results by following the clients wishes. If they want to have a house build upside down standing on its chimney, it's up to you to figure out how do it, while still making it usable.