What do I need to set the step size to for an Oracle DB. I'm running a R1, but I'm unsure on the step size. Is the step size equivalent to a stripe size? Also how do I verify that the VVs are running across all disks? What is the set size all about?
Thanks
Oracle DB Step Size
-
Richard Siemers
- Site Admin
- Posts: 1333
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: Oracle DB Step Size
Set size is how many drives in the raid set. For raid 5, a set size of 6 would mean that you have 5+1. For raid 1, a set size of 2 is a single mirror, 3 is a triple mirror... and so on.
"Step size" is a different advanced setting all together that 99% of the time should be left at default. Contact your HP storage SE or support for advice on changing that.
"Step size" is a different advanced setting all together that 99% of the time should be left at default. Contact your HP storage SE or support for advice on changing that.
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
-
sunshinekoxtn
- Posts: 7
- Joined: Wed Oct 10, 2012 1:41 pm
Re: Oracle DB Step Size
Thanks for the info. Man I'm glad I found this site.