Present VV using fiber channel and iscsi at same time

[zuwairi14]

Hi,

I have fiber channel and iscsi connectivity on F400

Can I present VV to the server using fiber channel and iscsi at the same time?

any effect on the server to determine the LUN

[Fastjack]

I have fiber channel and iscsi connectivity on F400
Can I present VV to the server using fiber channel and iscsi at the same time?

If it works the same way as on a V-class then Yes, you can present a volume via both ways at the same time.

[zuwairi14]

Hi,

what u mean by works the same way as on a V-class?

[Fastjack]

what u mean by works the same way as on a V-class?

I just meant that you are working on an F400 while I have experience only with a V800 (V-class). So my information may not apply to you (but it probably does).

[Christian]

V-Class , T-Class , F-Class if you can do it on a V-Class you can do it on a F-Class.
Same software only a bit different hardware

[Richard Siemers]

Yes it should work.... I recommend making the FC path the primary and the iSCSI path a failover only... I wouldn't recommend round robin.