showpd or other cli command to see if zero detect enabled...

Post Reply
mohuddle
Posts: 62
Joined: Thu May 08, 2014 4:43 pm

showpd or other cli command to see if zero detect enabled...

Post by mohuddle »

showpd or other cli command to see if zero detect enabled on a volume?
Top
Schmoog
Posts: 242
Joined: Wed Oct 30, 2013 2:30 pm

Re: showpd or other cli command to see if zero detect enable

Post by Schmoog »

-
Last edited by Schmoog on Wed Jul 09, 2014 3:42 pm, edited 1 time in total.
Top
3ParDude_1
Posts: 71
Joined: Tue May 27, 2014 11:23 am

Re: showpd or other cli command to see if zero detect enable

Post by 3ParDude_1 »

showvv -pol

Then check Zero Detect is listed under policies for the volume in question
Twitter @d8taDude
Top
mohuddle
Posts: 62
Joined: Thu May 08, 2014 4:43 pm

Re: showpd or other cli command to see if zero detect enable

Post by mohuddle »

3ParDude_1 wrote:showvv -pol

Then check Zero Detect is listed under policies for the volume in question


Thanks much 3ParDude_1 !!!
Top
Post Reply

Return to “3PAR Discussion”