3PAR 7400 controller error
-
Richard Siemers
- Site Admin
- Posts: 1333
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: 3PAR 7400 controller error
I suspect the OP lives in a country with severe trade restrictions imposed by U.S. and other nations, which explains why calling/getting support from HP is not an option. Steve what country is the broken 3PAR located in?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
-
steve_carlose
- Posts: 34
- Joined: Thu Jan 30, 2014 1:36 am
Re: 3PAR 7400 controller error
is in Armenia
-
Richard Siemers
- Site Admin
- Posts: 1333
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: 3PAR 7400 controller error
Are your VSP and Nodes on the same physical subnet so that Bootp/dhcp/pxe boot will work?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
-
steve_carlose
- Posts: 34
- Joined: Thu Jan 30, 2014 1:36 am
Re: 3PAR 7400 controller error
Hello every body.
Finally my problem was solved.I changed the SSD drive
Best Regards
Finally my problem was solved.I changed the SSD drive
Best Regards
-
Richard Siemers
- Site Admin
- Posts: 1333
- Joined: Tue Aug 18, 2009 10:35 pm
- Location: Dallas, Texas
Re: 3PAR 7400 controller error
Hello Steve -
What connection settings did you use to connect to the controller serial port?
What connection settings did you use to connect to the controller serial port?
Richard Siemers
The views and opinions expressed are my own and do not necessarily reflect those of my employer.
The views and opinions expressed are my own and do not necessarily reflect those of my employer.