HPE Storage Users Group

A Storage Administrator Community




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: waiting for nodes 1 to boot up
PostPosted: Fri Feb 05, 2021 6:12 pm 

Joined: Fri Feb 05, 2021 5:58 pm
Posts: 4
Hello everybody.
We had to move a 3PAR 7200 so we shut down properly.
Once rekindled, the beautiful surprise:
Code:
InServ cli% showsysmgr
TOC quorum found for TOC 326028, but waiting for nodes 1 to boot up. If the nodes are offline, use 'setsysmgr tocgen 326028'.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326028) Modified(2021-02-05 19:52:36 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.

It has been like this for more than two hours that the node 1 has a fixed blue led
I tried
Code:
InServ cli% shutdownnode reboot 1
Error: System manager is still initializing - try this command later.
Use 'showsysmgr' to see the current system state.


Code:
InServ cli% showversion
Release version 3.1.2 (MU2)
Patches:  P11,P19,P25,P38,P39

Component Name                   Version
CLI Server                       3.1.2 (MU2)
CLI Client                       3.1.2 (MU2)
System Manager                   3.1.2 (P11)
Kernel                           3.1.2 (MU2)
TPD Kernel Code                  3.1.2 (MU2)
TPD Kernel Patch                 3.1.2 (P38)




I am really desperate, can i try to do something?


Top
 Profile  
Reply with quote  
 Post subject: Re: waiting for nodes 1 to boot up
PostPosted: Fri Feb 05, 2021 8:23 pm 

Joined: Fri Feb 05, 2021 5:58 pm
Posts: 4
I tryed:
Code:
InServ cli% setsysmgr tocgen 326028
Are you sure you want to run setsysmgr tocgen?
select q=quit y=yes n=no: y
InServ cli% showsysmgr
System is reporting an unknown initialization type: ms_tocgen
TOC quorum found for TOC 326028, but waiting for nodes 1 to boot up because we need to recover from a previous powerfail.-You can use 'setsysmgr force_iderecovery' to force recovery with possible data loss.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326028) Modified(2021-02-05 19:52:36 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.

InServ cli% setsysmgr force_iderecovery
Are you sure you want to run setsysmgr force_iderecovery?
select q=quit y=yes n=no: y
InServ cli% showsysmgr
System is reporting an unknown initialization type: ms_tocgen
TOC quorum found for TOC 326028, but waiting for nodes 1 to boot up because we need to recover from a previous powerfail.-You can use 'setsysmgr force_iderecovery' to force recovery with possible data loss.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326028) Modified(2021-02-05 19:52:36 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.



but after a few time whitout pinging the console, i have this:
Code:
InServ cli% showsysmgr
System is recovering from a previous power failure.
TOC quorum found for TOC 326033, but waiting for nodes 1 to boot up. If the nodes are offline, use 'setsysmgr tocgen 326033'.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326033) Modified(2021-02-06 02:05:55 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.



Top
 Profile  
Reply with quote  
 Post subject: Re: waiting for nodes 1 to boot up
PostPosted: Fri Feb 05, 2021 9:40 pm 

Joined: Mon Sep 21, 2015 2:11 pm
Posts: 1230
Location: Europe
Sounds like a dead node.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.


Top
 Profile  
Reply with quote  
 Post subject: Re: waiting for nodes 1 to boot up
PostPosted: Fri Feb 05, 2021 10:02 pm 

Joined: Fri Feb 05, 2021 5:58 pm
Posts: 4
Yes, I think so.
After the command above the system start whit just one node
Code:
InServ cli% shownode
                                                               Control    Data        Cache
Node --Name--- -State- Master InCluster -Service_LED ---LED--- Mem(MB) Mem(MB) Available(%)
   0 1628555-0 OK      Yes    Yes       Off          GreenBlnk    8192    8192            0


But i can see this...and i'm worry...what happened ?
The LUN and the ESX's datastore they would look OK but...
Code:
---------------------------------------------------------
-----------------------Disk Inventory--------------------
---------------------------------------------------------

Id CagePos State    ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType
 0 1:7:0   degraded 5000CCA06F074FF7 HITACHI HCBRE0450GBAS10K W6G40NPG 3P00     SAS      Magnetic
 1 0:1:0   degraded 5000CCA02252725B HITACHI HCBRE0450GBAS10K KMWGAMDL 3P00     SAS      Magnetic
 2 0:2:0   degraded 5000CCA0225270EB HITACHI HCBRE0450GBAS10K KMWGAJEL 3P00     SAS      Magnetic
 3 0:3:0   degraded 5000CCA0225261C7 HITACHI HCBRE0450GBAS10K KMWG9J5L 3P00     SAS      Magnetic
 4 0:4:0   degraded 5000CCA0224D2AA3 HITACHI HCBRE0450GBAS10K KMWBELSF 3P00     SAS      Magnetic
 5 0:5:0   degraded 5000CCA0224EC4E7 HITACHI HCBRE0450GBAS10K KMWD9XSF 3P00     SAS      Magnetic
 6 0:6:0   degraded 5000CCA0224A1F87 HITACHI HCBRE0450GBAS10K KMW9SR8F 3P00     SAS      Magnetic
 7 0:7:0   degraded 5000CCA02252618B HITACHI HCBRE0450GBAS10K KMWG9HPL 3P00     SAS      Magnetic
 8 0:8:0   degraded 5000CCA022497DDF HITACHI HCBRE0450GBAS10K KMW9DYJF 3P00     SAS      Magnetic
 9 0:9:0   degraded 5000CCA022526197 HITACHI HCBRE0450GBAS10K KMWG9HTL 3P00     SAS      Magnetic
10 0:10:0  degraded 5000CCA022526483 HITACHI HCBRE0450GBAS10K KMWG9PUL 3P00     SAS      Magnetic
11 0:11:0  degraded 5000CCA0224ECF5F HITACHI HCBRE0450GBAS10K KMWDAMBF 3P00     SAS      Magnetic
12 0:12:0  degraded 5000CCA0224ECEFF HITACHI HCBRE0450GBAS10K KMWDALLF 3P00     SAS      Magnetic
13 0:13:0  degraded 5000CCA0224970BB HITACHI HCBRE0450GBAS10K KMW9D2DF 3P00     SAS      Magnetic
14 0:14:0  degraded 5000CCA02241D6B3 HITACHI HCBRE0450GBAS10K KMW56GTF 3P00     SAS      Magnetic
15 0:15:0  degraded 5000CCA0224D279F HITACHI HCBRE0450GBAS10K KMWBEDJF 3P00     SAS      Magnetic
16 1:0:0   degraded 5000CCA0224ECF03 HITACHI HCBRE0450GBAS10K KMWDALMF 3P00     SAS      Magnetic
17 1:1:0   degraded 5000CCA0224BD0BB HITACHI HCBRE0450GBAS10K KMWAPKML 3P00     SAS      Magnetic
18 0:0:0   degraded 5000CCA06F03187B HITACHI HCBRE0450GBAS10K W6G1PT2X 3P00     SAS      Magnetic
20 1:4:0   degraded 5000CCA0224BD173 HITACHI HCBRE0450GBAS10K KMWAPM3L 3P00     SAS      Magnetic
21 1:5:0   degraded 5000CCA0224B4FFF HITACHI HCBRE0450GBAS10K KMWADZVL 3P00     SAS      Magnetic
22 1:6:0   degraded 5000CCA0224DDCBF HITACHI HCBRE0450GBAS10K KMWBUGGL 3P00     SAS      Magnetic
24 1:8:0   degraded 5000CCA0224BE0F3 HITACHI HCBRE0450GBAS10K KMWARN3L 3P00     SAS      Magnetic
25 1:9:0   degraded 5000CCA0224BD08F HITACHI HCBRE0450GBAS10K KMWAPK8L 3P00     SAS      Magnetic
26 1:10:0  degraded 5000CCA0224ECF0B HITACHI HCBRE0450GBAS10K KMWDALPF 3P00     SAS      Magnetic
27 1:11:0  degraded 5000CCA0224ECF23 HITACHI HCBRE0450GBAS10K KMWDALWF 3P00     SAS      Magnetic
28 1:12:0  degraded 5000CCA0224A1F3B HITACHI HCBRE0450GBAS10K KMW9SPNF 3P00     SAS      Magnetic
29 1:13:0  degraded 5000CCA0224ECF57 HITACHI HCBRE0450GBAS10K KMWDAM9F 3P00     SAS      Magnetic
30 1:14:0  degraded 5000CCA0224ECF1B HITACHI HCBRE0450GBAS10K KMWDALUF 3P00     SAS      Magnetic
31 1:15:0  degraded 5000CCA0224D2A5F HITACHI HCBRE0450GBAS10K KMWBEL6F 3P00     SAS      Magnetic
32 1:2:0   degraded 5000CCA055052377 HITACHI HCBRE0450GBAS10K KHG2ULTR 3P00     SAS      Magnetic
33 1:3:0   degraded 5000CCA06F05985F HITACHI HCBRE0450GBAS10K W6G32D4G 3P00     SAS      Magnetic
--------------------------------------------------------------------------------------------------


Top
 Profile  
Reply with quote  
 Post subject: Re: waiting for nodes 1 to boot up
PostPosted: Fri Feb 05, 2021 10:52 pm 

Joined: Fri Feb 05, 2021 5:58 pm
Posts: 4
mmm I think is normal whit just one node

Code:
InServ cli% showpd -s 27
Id CagePos Type -State-- -Detailed_State-
27 1:11:0  FC   degraded missing_A_port
-----------------------------------------
 1 total
InServ cli% showpd -s 18
Id CagePos Type -State-- -Detailed_State-
18 0:0:0   FC   degraded missing_A_port
-----------------------------------------
 1 total


Top
 Profile  
Reply with quote  
 Post subject: Re: waiting for nodes 1 to boot up
PostPosted: Mon Feb 08, 2021 4:15 am 

Joined: Wed Nov 09, 2011 12:01 pm
Posts: 375
Yes would be expected with node/path down. Have you tried having a serial connection to Node1 during boot? Might at least get a failure reason (disk, ram etc).


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 


Who is online

Users browsing this forum: Majestic-12 [Bot] and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | DVGFX2 by: Matt