koopa79 wrote:
So currently i have a QW witness setup, i've made up the IP's below but currently i have setup where both primary and secondary arrays talk to the witness on 1 IP as in the green links. So they are connected to a stretched VLAN.
But networks want me to move off this stretched vlan. So does anyone know if the qw witness is allowed to have 2 nics one if both networks. is the red lines in the picture below. Am I allowed the qw to have IP's 10.0.10.26 & 10.50.10.26 to talk in each site to the 3par?
basic picture added
Not seen any docs mentioning that, could you route between the subnets? The witness and both arrays don't 'need' to be on the same vlan/subnet just so long as there's a route/acl to allow them to talk to each other (our arrays and witnesses are in 3 different vlans/subnets).