Email alerts for space utilisation

cnkwocha · **Joined:** Mon Nov 03, 2014 7:23 am **Posts:** 2

Hello All, I need to setup my storage to send email alerts when set thresholds are reached.

precisely, i need to know if i can set this up for

1. VV utilisation
2. Whole storage space utilisation

I have an Inserve V400 running OS 3.1.2 with only FC disks.

Thanks

nsnidanko · **Joined:** Mon Feb 03, 2014 9:40 am **Posts:** 116

1. I am assuming you're referring to thin VV; you need to enable "Allocation Warning" under desired VV.
2. By default there are set up warnings for each disk class at 50%, 75%, 85%, 95% allocation of available capacity

You need to configure SP to email these alerts.

Schmoog · **Joined:** Wed Oct 30, 2013 2:30 pm **Posts:** 242

For the whole system, you need only enable email alerts on the sp. The whole system thresholds.should be set by default

nsnidanko · **Joined:** Mon Feb 03, 2014 9:40 am **Posts:** 116

Additionally, you can set RAW space alert for each disk class. In IMC select array and do "Edit system"

cnkwocha · **Joined:** Mon Nov 03, 2014 7:23 am **Posts:** 2

Thanks All,

can i edit the default? can someone please guide me to get to the point of at least viewing the defaults ? i can only see where to add/edit email recipients but not the desired alerts

nsnidanko, i would also like to know usage of fully provisioned volumes.

i

nsnidanko · **Joined:** Mon Feb 03, 2014 9:40 am **Posts:** 116

I believe you edit defaults via Predefining Symptoms (page 30 in HP 3PAR Service Processor Software User Guide) but better confirm with HP Support.

fully provisioned volume (thick) will be always 100% provisioned

You need to monitor it inside the connected host.

HPE Storage Users Group

Email alerts for space utilisation

Who is online