HPE Storage Users Group https://3parug.net/ |
|
hp 3par 7200 default ip https://3parug.net/viewtopic.php?f=18&t=608 |
Page 1 of 1 |
Author: | agree [ Sun Feb 23, 2014 10:08 am ] |
Post subject: | hp 3par 7200 default ip |
hi, i assigned an ip address to vsp from 192.168.x.x block but in 'storage system setup wizard' i am getting the error '...make sure the sp is on the same network as the specified storage system.' in which netwok(subnet) is storage server by default? thanks! |
Author: | Josh26 [ Sun Feb 23, 2014 4:24 pm ] |
Post subject: | Re: hp 3par 7200 default ip |
I don't believe it has any IP configured at all until you connect to the console port and configure it as such. |
Author: | spencer.ryan [ Sun Feb 23, 2014 4:36 pm ] |
Post subject: | Re: hp 3par 7200 default ip |
Make sure the subnet the 7200 is plugged into has DHCP running, and either let the SP get a address in the same range, or statically assign one. After setup you can set them both to whatever you'd like (don't need to keep DHCP running if you don't want) |
Author: | Josh26 [ Sun Feb 23, 2014 6:21 pm ] |
Post subject: | Re: hp 3par 7200 default ip |
Defaulting to DHCP assigned is always an unusual choice - who ever has a DHCP server in the datacentre - on their storage network? |
Author: | Richard Siemers [ Thu Mar 06, 2014 2:32 pm ] |
Post subject: | Re: hp 3par 7200 default ip |
Does the SmartStart CD try to do any sort of mac address broadcasting for initial setup? I never used it, but reading the instructions says something about needing to be on the same subnet as the new hardware... reminded me of how HP Jet Direct cards are/used to be discovered and configured. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |