| HPE Storage Users Group https://3parug.net/ |
|
| 3par – new disk showing amber LED https://3parug.net/viewtopic.php?f=18&t=3943 |
Page 1 of 1 |
| Author: | dratmti [ Wed Jan 24, 2024 3:28 pm ] |
| Post subject: | 3par – new disk showing amber LED |
Hello, I replaced a failed disk in a out of maintenance 3PAR 7200, but after completing all steps, the new disk still showing amber light. There is no running servicemag command nor is the system showing any error. System tuning has been completed, GUI and CLI showing status ok. I couldn't find a solution here or web either  Is there a way to fix this issue? Best Regards! |
|
| Author: | MammaGutt [ Thu Jan 25, 2024 1:06 am ] |
| Post subject: | Re: 3par – new disk showing amber LED |
dratmti wrote: Hello, I replaced a failed disk in a out of maintenance 3PAR 7200, but after completing all steps, the new disk still showing amber light. There is no running servicemag command nor is the system showing any error. System tuning has been completed, GUI and CLI showing status ok. I couldn't find a solution here or web either Is there a way to fix this issue? Best Regards! Are you sure you installed a supported drive? |
|
| Author: | modi [ Sat Jan 27, 2024 9:06 am ] |
| Post subject: | Re: 3par – new disk showing amber LED |
MammaGutt wrote: dratmti wrote: Hello, I replaced a failed disk in a out of maintenance 3PAR 7200, but after completing all steps, the new disk still showing amber light. There is no running servicemag command nor is the system showing any error. System tuning has been completed, GUI and CLI showing status ok. I couldn't find a solution here or web either Is there a way to fix this issue? Best Regards! Are you sure you installed a supported drive? |
|
| Author: | angrylemon [ Tue Apr 30, 2024 11:21 am ] |
| Post subject: | Re: 3par – new disk showing amber LED |
I've had this same issue on a 7400c, showpd all looked OK, no other issues from checkhealth and the same model numbers and FW version after upgrade as the rest of the disks in the system. The only thing thats cleared it for me was a full shutdown and power on of the 3par (upon moving it to a different location) so I'd just assumed it was a bug with 3.3.1 MU3. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|