| HPE Storage Users Group https://3parug.net/ |
|
| 3PAR FCOE DAS https://3parug.net/viewtopic.php?f=18&t=3930 |
Page 1 of 1 |
| Author: | sebastian7780_2 [ Wed Nov 15, 2023 5:55 pm ] |
| Post subject: | 3PAR FCOE DAS |
hello everyone. I have 1 3PAR 7200 with a converged HBA Qlogic QLE8242 on each node. I see that it supports iSCSI and FCoE. Can I use those ports to directly connect a server using an LC-LC cable? The server has an 8Gb HBA Emulex o Qlogic Or can I connect with that converged QLE to a 16Gb Brocade SAN Switch? Do you see it possible? Node Slot Type -Manufacturer- -Model-- ----Serial---- -Rev- Firmware 0 0 SAS LSI 9205-8e Onboard 01 17.11.00.00 0 1 FC EMULEX LPe12002 Onboard 03 2.10.X.3 0 2 CNA QLOGIC QLE8242 PCGLT0AST8XNEC 58 4.15.8 0 3 Eth Intel e1000e Onboard n/a 3.2.5-k 1 0 SAS LSI 9205-8e Onboard 01 17.11.00.00 1 1 FC EMULEX LPe12002 Onboard 03 2.10.X.3 1 2 CNA QLOGIC QLE8242 PCGLT0AST8XNLP 58 4.15.8 1 3 Eth Intel e1000e Onboard n/a 3.2.5-k Thanks to all for the help Sebastian - FROM CHILE |
|
| Author: | MammaGutt [ Fri Nov 17, 2023 4:33 am ] |
| Post subject: | Re: 3PAR FCOE DAS |
All controller nodes should have 2x 8Gb FC. Those could be direct connected to services with 8Gb HBA. Qlogic QLE8242 is a 10Gb ethernet (converged network) adapter that supports FCoE and iSCSI. This can only be connected to a 10Gbe Ethernet switch. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|