HPE Storage Users Group

Greetings

apologies as this is not for 3par , hoping to get some insight from you guys as i cannot get a straight answer elsewhere.

got an HP EVA 6350 with 2 controller installed as below:

Model number: HSV340
Spare part number: 671991-001
Assembly part number: AJ918-60103

Recently ive been getting some notifications that one of the controllers entered degraded state and after a while operation state becomes good. naturally ive started looking to buy a spare controller in case of failure and i cannot find the same part number. The one i found is listed below

HP AJ918-63001 Storage Array Controller für EVA P6300 HSV340
Spare part number: 537151-001

do you believe that if i replace a failed controller with different part number but same model (HSV340) it will be ok ?

much appreciated

Pek

Pretty sure it wouldn't work as there used to be an upgrade kit from 6300 to 6350 back in the days which included some hardware.

_________________
The views and opinions expressed are my own and do not necessarily reflect those of my current or previous employers.

P6300 Controller description and spare number:
4Gb P6300 array controller kit - HSV340, FC : 537151-001
4Gb P6300 array controller kit - HSV340, with iSCSI, 1 GbE : 537152-001
10Gb Ethernet FC P63x0 controller : 671991-001

P6350 Controller description and spare number:
SPS-Assy, Controller, FC, Minimum XCS 11001000 : 671989-001
SPS-Assy, Controller, FC/1 GbE, Minimum XCS 11001000 : 671990-001
SPS-Assy, Controller, FC/10 GbE, Minimum XCS11001000 : 671991-001

Some info you might need to check:
HPE StorageWorks P6300/6350 Enterprise Virtual Array - How to Determine if User has a P6350 or a P6300 Array - https://support.hpe.com/hpesc/public/do ... =c03467477

HPE EVA P6000 Storage - Parts Support Guide
https://support.hpe.com/hpesc/public/do ... CCDFE.html