HPE Storage Users Group https://3parug.net/ |
|
LD in preserved state after power loss https://3parug.net/viewtopic.php?f=18&t=3914 |
Page 1 of 1 |
Author: | feldsam [ Wed Aug 16, 2023 9:28 am ] |
Post subject: | LD in preserved state after power loss |
Hello, I have problem on one of our 3par arrays. After power failure, I managed to bring array back online. I had to ldcheck admin LDs and so, but one LD on which are two VV is in preserved state and I can do nothing. Here is output from CLI commands: Code: HP_3PAR_8400 cli% showpdata Ldname Preserved raidsets Preserved chunklets tp-10-sd-0.2 1 1 HP_3PAR_8400 cli% showld tp-10-sd-0.2 Id Name RAID --Detailed_State-- Own SizeMB UsedMB Use Lgct LgId WThru MapV 88 tp-10-sd-0.2 5 preserved,checking 1/3/0/- 55296 40704 C,SD 0 --- Y Y --------------------------------------------------------------------------------------- 1 55296 40704 HP_3PAR_8400 cli% startvv VV_SC_6 Either vv VV_SC_6 or one of its snapchildren failed to start Would somebody help in this situation? Only one SSD drive is in failed state. Some others are in degraded state, because of missing node2 (missing port A). Node have some hw issue, it keeps rebooting also after noderescue. So array is running with three nodes now. |
Author: | MammaGutt [ Wed Aug 16, 2023 1:18 pm ] |
Post subject: | Re: LD in preserved state after power loss |
Since it is in the checking state I would probably wait. Since you are running RAID5 (which was been discouraged from before 8000 was launched) you could be hit with URE + single disk failure resulting in data loss. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |