HPE Storage Users Group
https://3parug.net/

3par 7400 degraded and failed on the same disk
https://3parug.net/viewtopic.php?f=18&t=3911
Page 1 of 1

Author:  tegomal [ Fri Jul 28, 2023 11:58 pm ]
Post subject:  3par 7400 degraded and failed on the same disk

Hi, i have a disk with status degraded and failed.
already did servicemag, the status is success.
so can i just take out this disk and replace it with the new one?

showpd -i display different wwn for each IDs on 4:5

Attachments:
showpd -i.PNG
showpd -i.PNG [ 4.61 KiB | Viewed 17480 times ]
File comment: successfully brought the disk offline
servicemag.PNG
servicemag.PNG [ 5.08 KiB | Viewed 17482 times ]
File comment: degraded and failed 4:5
showpd.PNG
showpd.PNG [ 4.94 KiB | Viewed 17482 times ]

Author:  MammaGutt [ Sat Jul 29, 2023 7:35 am ]
Post subject:  Re: 3par 7400 degraded and failed on the same disk

PD100 was removed from the system without servicemag running correct.

what does showpd -s say?

PD97 could both be a replacement drive or a failed drive in the same slot.

Author:  tegomal [ Sat Jul 29, 2023 7:55 am ]
Post subject:  Re: 3par 7400 degraded and failed on the same disk

showpd -s says

Id CagePos Type -State-- ---------------------------Detailed_State--------------------------- -SedState-
97 4:5:0 NL degraded notready,prolonged_missing_A_port,prolonged_missing_B_port,servicing unknown
100 4:5:0? NL failed vacated,missing,invalid_media,no_valid_ports,servicing unknown

is it ok now to just take out this disk and replace it with the new one?

Author:  MammaGutt [ Tue Aug 01, 2023 12:01 am ]
Post subject:  Re: 3par 7400 degraded and failed on the same disk

tegomal wrote:
showpd -s says

Id CagePos Type -State-- ---------------------------Detailed_State--------------------------- -SedState-
97 4:5:0 NL degraded notready,prolonged_missing_A_port,prolonged_missing_B_port,servicing unknown
100 4:5:0? NL failed vacated,missing,invalid_media,no_valid_ports,servicing unknown

is it ok now to just take out this disk and replace it with the new one?


it should be, but you have some cleanup to do.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/