MammaGutt wrote:
I see one important line in there…
Quote:
[ 42.647579] Node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[ 42.675598] Remote node type mismatch. Node 0 should be of type 2 node value, but the node type that was received was 2 node enhanced.Node 0 cannot join the cluster
[
From the looks of it you have a 7200c replacement node in a 7200 system…. or the other way around.
Thanks for your answer.
Are the nodes not compatible with each other?
This compatibility is not achieved with the procedure in the Wack> ?
From Whack> on the replacement node issue prom edit <CR>. Then hit return to see each item in the prom.
SMI Whack>prom edit
Board Spin: 03
Size * 256 bytes: 04
Board Class: 920
Board Base: 200040
Board Rev: 91
Assembly Vendor: FXN
Assembly Year: 2012
Assembly Week: 30
Assembly Day: 03
Assembly Serial: 00103530
Alternate Class: ffff
Alternate Base: ffff
Alternate Dash: ff
System Serial: 9902109
Node ID: 03 FF or value of slot node is installed in
Midplane Type: 1b See Below for current settings.
Node Type: 40
SMI Whack>
Midplane and Node Type must match the other nodes. This list will change as new models are released . Current selections as of August 2014 are
StoreServ 7200: Mid-plane Type 1a Node Type 20
StoreServ 7400: Mid-plane Type 1b Node Type 40
StoreServ 7450: Mid-plane Type 1e Node Type 80