HPE Storage Users Group https://3parug.net/ |
|
old SAN https://3parug.net/viewtopic.php?f=18&t=3751 |
Page 1 of 1 |
Author: | Phill [ Mon Feb 28, 2022 4:16 am ] |
Post subject: | old SAN |
Hi I have new SAN deployed and migrated servers to new SAN, how i make sure from old 3par san that not used at all from any server just for verification ? Thanks |
Author: | MammaGutt [ Mon Feb 28, 2022 5:06 am ] |
Post subject: | Re: old SAN |
What I would do is to run the following in CLI: statvlun -hostsum That will show any IO activity to any volumes per hosts. If you have a lot of hosts connected you could add "-ni" at the end to exclude any hosts with 0 IO. It's not perfect science but probably the best you got if you don't have control |
Author: | Phill [ Mon Feb 28, 2022 5:35 am ] |
Post subject: | Re: old SAN |
thank you i see there is io, and vvsum will show the io for vv or lun right |
Author: | MammaGutt [ Mon Feb 28, 2022 6:00 am ] |
Post subject: | Re: old SAN |
Phill wrote: thank you i see there is io, and vvsum will show the io for vv or lun right correct. statvlun -vvsum shows per vv. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |