HPE Storage Users Group https://3parug.net/ |
|
Changing QW used on 3pars https://3parug.net/viewtopic.php?f=18&t=3617 |
Page 1 of 1 |
Author: | koopa79 [ Tue Jul 06, 2021 9:40 am ] |
Post subject: | Changing QW used on 3pars |
So i have a number of 3pars connection to a version 2 QW, and i believe i should be using the version 3 which is an RPM installed on a linux server. So i've deployed these. Just wondering if the someone has the correct steps on how to stop using 1 QW and flip it to use the new one? ideally CLI commands would be great |
Author: | ailean [ Tue Jul 06, 2021 11:14 am ] |
Post subject: | Re: Changing QW used on 3pars |
Don't have the commands to hand but basically stop witness service on both arrays, remove witness server on both arrays and then follow the add witness server routine for the new witness. The steps/commands for each stage are in the remote copy guide. Based on some rough notes I have it kind of goes like this (remember to do one step at a time, on both arrays, can use the -remote option sometimes but I prefer having 2 ssh sessions so you can clearly see the progress with the show command as you go. Can take a little while for each command to complete in the background, the cli comes back quick so do a couple of shows to see it finish) . Code: showrcopy -qw targets
setrcopytarget witness stop <target_name> setrcopytarget witness remove <target_name> setrcopytarget witness check <IP of Quorum Witness> setrcopytarget witness create <IP of Quorum Witness> <target_name> setrcopytarget witness start <target_name> setrcopytarget witness start –remote <target_name> |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |