Is this a new install, or is this an existing live system that has other ESXi hosts connected?
I assume you are missing 1:1:2?
Can any other host see 1:1:2? If yes, then it's likely to be a zoning problem, and do a deep dive making triple sure the WWPNs are zoned correctly.
If nothing can see 1:1:2 then troubleshoot the switch connection from 1:1:2 to switch.
Does the switch show the port where 1:1:2 is plugged is as online?
Is the switch port licensed? Many FC switches are licensed per active port, you may have a 24 port switch with only 8 ports licensed for example.
Is the switch port admin up or down?
Is the switch port assigned to a different Cisco VSAN or Brocade Virtual Fabric?
Does the switch see the WWN of port 1:1:2 logged in?
Does the 3par show 1:1:2 online and is it configured as a "host" port?
Hope this helps!
_________________ Richard Siemers The views and opinions expressed are my own and do not necessarily reflect those of my employer.
|