HPE Storage Users Group
https://3parug.net/

waiting for nodes 1 to boot up
https://3parug.net/viewtopic.php?f=18&t=3538
Page 1 of 1

Author:  zotgene [ Fri Feb 05, 2021 6:12 pm ]
Post subject:  waiting for nodes 1 to boot up

Hello everybody.
We had to move a 3PAR 7200 so we shut down properly.
Once rekindled, the beautiful surprise:
Code:
InServ cli% showsysmgr
TOC quorum found for TOC 326028, but waiting for nodes 1 to boot up. If the nodes are offline, use 'setsysmgr tocgen 326028'.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326028) Modified(2021-02-05 19:52:36 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.

It has been like this for more than two hours that the node 1 has a fixed blue led
I tried
Code:
InServ cli% shutdownnode reboot 1
Error: System manager is still initializing - try this command later.
Use 'showsysmgr' to see the current system state.


Code:
InServ cli% showversion
Release version 3.1.2 (MU2)
Patches:  P11,P19,P25,P38,P39

Component Name                   Version
CLI Server                       3.1.2 (MU2)
CLI Client                       3.1.2 (MU2)
System Manager                   3.1.2 (P11)
Kernel                           3.1.2 (MU2)
TPD Kernel Code                  3.1.2 (MU2)
TPD Kernel Patch                 3.1.2 (P38)




I am really desperate, can i try to do something?

Author:  zotgene [ Fri Feb 05, 2021 8:23 pm ]
Post subject:  Re: waiting for nodes 1 to boot up

I tryed:
Code:
InServ cli% setsysmgr tocgen 326028
Are you sure you want to run setsysmgr tocgen?
select q=quit y=yes n=no: y
InServ cli% showsysmgr
System is reporting an unknown initialization type: ms_tocgen
TOC quorum found for TOC 326028, but waiting for nodes 1 to boot up because we need to recover from a previous powerfail.-You can use 'setsysmgr force_iderecovery' to force recovery with possible data loss.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326028) Modified(2021-02-05 19:52:36 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.

InServ cli% setsysmgr force_iderecovery
Are you sure you want to run setsysmgr force_iderecovery?
select q=quit y=yes n=no: y
InServ cli% showsysmgr
System is reporting an unknown initialization type: ms_tocgen
TOC quorum found for TOC 326028, but waiting for nodes 1 to boot up because we need to recover from a previous powerfail.-You can use 'setsysmgr force_iderecovery' to force recovery with possible data loss.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326028) Modified(2021-02-05 19:52:36 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.



but after a few time whitout pinging the console, i have this:
Code:
InServ cli% showsysmgr
System is recovering from a previous power failure.
TOC quorum found for TOC 326033, but waiting for nodes 1 to boot up. If the nodes are offline, use 'setsysmgr tocgen 326033'.

TOCs found:
Valid TOC:   Name(3PAR-PEC) Sysid(28555) Gen(326033) Modified(2021-02-06 02:05:55 CET) Disk count(32/32)

32 disks were available to be examined for TOCs.


Author:  MammaGutt [ Fri Feb 05, 2021 9:40 pm ]
Post subject:  Re: waiting for nodes 1 to boot up

Sounds like a dead node.

Author:  zotgene [ Fri Feb 05, 2021 10:02 pm ]
Post subject:  Re: waiting for nodes 1 to boot up

Yes, I think so.
After the command above the system start whit just one node
Code:
InServ cli% shownode
                                                               Control    Data        Cache
Node --Name--- -State- Master InCluster -Service_LED ---LED--- Mem(MB) Mem(MB) Available(%)
   0 1628555-0 OK      Yes    Yes       Off          GreenBlnk    8192    8192            0


But i can see this...and i'm worry...what happened ?
The LUN and the ESX's datastore they would look OK but...
Code:
---------------------------------------------------------
-----------------------Disk Inventory--------------------
---------------------------------------------------------

Id CagePos State    ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType
 0 1:7:0   degraded 5000CCA06F074FF7 HITACHI HCBRE0450GBAS10K W6G40NPG 3P00     SAS      Magnetic
 1 0:1:0   degraded 5000CCA02252725B HITACHI HCBRE0450GBAS10K KMWGAMDL 3P00     SAS      Magnetic
 2 0:2:0   degraded 5000CCA0225270EB HITACHI HCBRE0450GBAS10K KMWGAJEL 3P00     SAS      Magnetic
 3 0:3:0   degraded 5000CCA0225261C7 HITACHI HCBRE0450GBAS10K KMWG9J5L 3P00     SAS      Magnetic
 4 0:4:0   degraded 5000CCA0224D2AA3 HITACHI HCBRE0450GBAS10K KMWBELSF 3P00     SAS      Magnetic
 5 0:5:0   degraded 5000CCA0224EC4E7 HITACHI HCBRE0450GBAS10K KMWD9XSF 3P00     SAS      Magnetic
 6 0:6:0   degraded 5000CCA0224A1F87 HITACHI HCBRE0450GBAS10K KMW9SR8F 3P00     SAS      Magnetic
 7 0:7:0   degraded 5000CCA02252618B HITACHI HCBRE0450GBAS10K KMWG9HPL 3P00     SAS      Magnetic
 8 0:8:0   degraded 5000CCA022497DDF HITACHI HCBRE0450GBAS10K KMW9DYJF 3P00     SAS      Magnetic
 9 0:9:0   degraded 5000CCA022526197 HITACHI HCBRE0450GBAS10K KMWG9HTL 3P00     SAS      Magnetic
10 0:10:0  degraded 5000CCA022526483 HITACHI HCBRE0450GBAS10K KMWG9PUL 3P00     SAS      Magnetic
11 0:11:0  degraded 5000CCA0224ECF5F HITACHI HCBRE0450GBAS10K KMWDAMBF 3P00     SAS      Magnetic
12 0:12:0  degraded 5000CCA0224ECEFF HITACHI HCBRE0450GBAS10K KMWDALLF 3P00     SAS      Magnetic
13 0:13:0  degraded 5000CCA0224970BB HITACHI HCBRE0450GBAS10K KMW9D2DF 3P00     SAS      Magnetic
14 0:14:0  degraded 5000CCA02241D6B3 HITACHI HCBRE0450GBAS10K KMW56GTF 3P00     SAS      Magnetic
15 0:15:0  degraded 5000CCA0224D279F HITACHI HCBRE0450GBAS10K KMWBEDJF 3P00     SAS      Magnetic
16 1:0:0   degraded 5000CCA0224ECF03 HITACHI HCBRE0450GBAS10K KMWDALMF 3P00     SAS      Magnetic
17 1:1:0   degraded 5000CCA0224BD0BB HITACHI HCBRE0450GBAS10K KMWAPKML 3P00     SAS      Magnetic
18 0:0:0   degraded 5000CCA06F03187B HITACHI HCBRE0450GBAS10K W6G1PT2X 3P00     SAS      Magnetic
20 1:4:0   degraded 5000CCA0224BD173 HITACHI HCBRE0450GBAS10K KMWAPM3L 3P00     SAS      Magnetic
21 1:5:0   degraded 5000CCA0224B4FFF HITACHI HCBRE0450GBAS10K KMWADZVL 3P00     SAS      Magnetic
22 1:6:0   degraded 5000CCA0224DDCBF HITACHI HCBRE0450GBAS10K KMWBUGGL 3P00     SAS      Magnetic
24 1:8:0   degraded 5000CCA0224BE0F3 HITACHI HCBRE0450GBAS10K KMWARN3L 3P00     SAS      Magnetic
25 1:9:0   degraded 5000CCA0224BD08F HITACHI HCBRE0450GBAS10K KMWAPK8L 3P00     SAS      Magnetic
26 1:10:0  degraded 5000CCA0224ECF0B HITACHI HCBRE0450GBAS10K KMWDALPF 3P00     SAS      Magnetic
27 1:11:0  degraded 5000CCA0224ECF23 HITACHI HCBRE0450GBAS10K KMWDALWF 3P00     SAS      Magnetic
28 1:12:0  degraded 5000CCA0224A1F3B HITACHI HCBRE0450GBAS10K KMW9SPNF 3P00     SAS      Magnetic
29 1:13:0  degraded 5000CCA0224ECF57 HITACHI HCBRE0450GBAS10K KMWDAM9F 3P00     SAS      Magnetic
30 1:14:0  degraded 5000CCA0224ECF1B HITACHI HCBRE0450GBAS10K KMWDALUF 3P00     SAS      Magnetic
31 1:15:0  degraded 5000CCA0224D2A5F HITACHI HCBRE0450GBAS10K KMWBEL6F 3P00     SAS      Magnetic
32 1:2:0   degraded 5000CCA055052377 HITACHI HCBRE0450GBAS10K KHG2ULTR 3P00     SAS      Magnetic
33 1:3:0   degraded 5000CCA06F05985F HITACHI HCBRE0450GBAS10K W6G32D4G 3P00     SAS      Magnetic
--------------------------------------------------------------------------------------------------

Author:  zotgene [ Fri Feb 05, 2021 10:52 pm ]
Post subject:  Re: waiting for nodes 1 to boot up

mmm I think is normal whit just one node

Code:
InServ cli% showpd -s 27
Id CagePos Type -State-- -Detailed_State-
27 1:11:0  FC   degraded missing_A_port
-----------------------------------------
 1 total
InServ cli% showpd -s 18
Id CagePos Type -State-- -Detailed_State-
18 0:0:0   FC   degraded missing_A_port
-----------------------------------------
 1 total

Author:  ailean [ Mon Feb 08, 2021 4:15 am ]
Post subject:  Re: waiting for nodes 1 to boot up

Yes would be expected with node/path down. Have you tried having a serial connection to Node1 during boot? Might at least get a failure reason (disk, ram etc).

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/