HPE Storage Users Group
https://3parug.net/

HPE 3PAR Service processor 5.0.7.0-28213 high CPU
https://3parug.net/viewtopic.php?f=18&t=3462
Page 1 of 2

Author:  profp62 [ Wed Aug 12, 2020 4:33 am ]
Post subject:  HPE 3PAR Service processor 5.0.7.0-28213 high CPU

Hi all

After upgrading SP to version 5.0.7.0-28213 from 5.0.6, i have problem with CPU.
After SP start / restart CPU load increases continuously and after one week is at 100 %.
I have two SP on this site and exactly the same behavior. Some ideas ? I didn't find any info ...

Thanks

Frantisek

Attachments:
SP_HIGH_CPU.jpg
SP_HIGH_CPU.jpg [ 72.44 KiB | Viewed 26896 times ]

Author:  MammaGutt [ Wed Aug 12, 2020 10:43 am ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

I would log a support case with HPE.

Author:  T16 [ Wed Aug 26, 2020 5:38 am ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

I am seeing EXACTLY the same.

After a period of time, the cpu just ramps up and up, until it sits continuously high, for hours. I have never waited more than 24hrs to see if it eventually settles down, but yeah, same issue here I am afraid.
I Just tend to reboot the SP's, but it comes back again a few days later.

Did you log a case? If so, I will too.

Attachments:
vSP_507.jpg
vSP_507.jpg [ 59.19 KiB | Viewed 26568 times ]

Author:  T16 [ Wed Aug 26, 2020 11:44 am ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

Oh I forgot... you have your vSP's hooked into vcenter with cross-stack analytics?

We do, and each time the vSP gets rebooted, it loses connection and we get a degraded error with the cross stack analytics until I go in manually and re-apply the same existing settings and its fine again.

What a ****show this 5.0.7 release is, I wish I had never bothered!

Author:  T16 [ Mon Aug 31, 2020 10:44 pm ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

lol typical, after rebooting the vSP's a good few times, the problem has gone away for the time being.

Author:  profp62 [ Wed Sep 16, 2020 3:51 pm ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

Hi all

I wasn't here for some time.

Yes i did log support case and the answer was, that is common well known bug in 5.0.7 :-)

No service note, no info on download portal ....

Should be repaired in next version.

Please stay on 5.0.6.1.

Bye

Author:  MammaGutt [ Thu Sep 24, 2020 9:26 am ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

https://support.hpe.com/hpesc/public/do ... 02915en_us

5.0.7.1 seems to have a fix for high CPU.

Author:  sanjac [ Mon Sep 28, 2020 6:47 am ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

I'm having the same problem
is 5.0.7.1. available for download?I can't find it

Author:  cali [ Mon Sep 28, 2020 3:38 pm ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

At the moment, you have to open a case.

Author:  T16 [ Thu Oct 01, 2020 1:41 pm ]
Post subject:  Re: HPE 3PAR Service processor 5.0.7.0-28213 high CPU

Available for download now via myenterpriselicense.

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/