| HPE Storage Users Group https://3parug.net/ |
|
| Serial connection problem on 3PAR 7200 https://3parug.net/viewtopic.php?f=18&t=330 |
Page 2 of 3 |
| Author: | Josh26 [ Sun Mar 02, 2014 7:46 pm ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
chanchon wrote: Thanks to all guys for helping on this topic . But i have one Q From which Document i can find about MFG port used for Serial Connection and also baud rate and other settings on serial connection . best regards The best document you will find will be this one: http://3cvguy.com/3par-storeserv-7000-s ... on-part-1/ |
|
| Author: | chanchon [ Mon Mar 03, 2014 9:58 am ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
Josh26 wrote: chanchon wrote: Thanks to all guys for helping on this topic . But i have one Q From which Document i can find about MFG port used for Serial Connection and also baud rate and other settings on serial connection . best regards The best document you will find will be this one: http://3cvguy.com/3par-storeserv-7000-s ... on-part-1/ thanks josh26 for reply BUT : Exactly wrong , if you read that Doc , you will be found that there it has been said baud rate 9600 and plug console Cable to MGMT port both of them are incorrect !!! the most important reason that lead me to ask this Q was that guide . i am looking for official HP Doc for connecting by console . |
|
| Author: | Josh26 [ Mon Mar 03, 2014 4:40 pm ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
HP don't support end users connecting to the console, so they aren't going to document the process. |
|
| Author: | Richard Siemers [ Thu Mar 06, 2014 6:13 pm ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
From the PDF titled "3PAR InServ T-Series Storage Server Installation and Deinstallation Guide" Appendix page C.7 57600 baud 8 bits No Parity 1 stop bit Xon/Xoff The gray adapter + standard cat5 cable should do the trick. The 7200 book does not include instructions for using the seriel port. http://h20628.www2.hp.com/km-ext/kmcsdi ... 6625-8.pdf |
|
| Author: | ChrisFaulkner [ Mon May 19, 2014 6:09 am ] | ||
| Post subject: | Re: Serial connection problem on 3PAR 7200 | ||
I am setting one up as we speak, had the same issue,. it isnt documented but disable XON/XOFF, baud rate 57600 also make sure you use the grey plug PN; 180-0055-01 and use a standard ethernet cat5 cable. I had to butcher the plug to fit my laptop also see attached screenshot of my settings; hope that helps! Chris F
|
|||
| Author: | 3cVguy [ Wed Jun 11, 2014 5:17 pm ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
I have corrected my post - at that time we did the first 7000 in the US so I really don't know where I got 9600 from, I obviously was able to access it. -Justin www.3cVguy.com |
|
| Author: | Windz [ Thu Nov 20, 2014 1:41 am ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
Hi all, i have same problem, i implement with gray connector P/N 50-0000177-01 and use cat 5 to connect, and the parameters on putty 57600, 8 , 1, none, none but still can't connect. Plz help me |
|
| Author: | Leif [ Thu Nov 20, 2014 10:33 am ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
Hi We connect to the mfg port of a node with the supplied, blue, serial cabel. 850-0023-01. The cabel came with the 3PAR. I guess you all have it in a box somewhere... putty and the following configuration com X Speed - 57600 Data bits - 8 Stop bits - 1 Parity - None Flow control - XON/XOFF |
|
| Author: | RitonLaBevue [ Fri Nov 21, 2014 5:14 am ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
As Leif said, you must use the grey adapter and the blue cable. Not any cat5 cable or the red one. |
|
| Author: | Windz [ Fri Nov 21, 2014 6:23 am ] |
| Post subject: | Re: Serial connection problem on 3PAR 7200 |
Thanks all for support, i had configured IP Add for 3par, but i still can't connect between 3par and processor service i had tested same subnet, and i had tested use connect directly but 3par and processor service still stuck on step generate SP ID, i had checked 3Par SN Plz help me, i stuck in this step on 3 days 
|
|
| Page 2 of 3 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|