in this situation i must install patches for 3.2.2 MU6 is ?
and with any patch i must start install
please explain the attachment photo
| Attachments: |
|
WhatsApp Image 2019-08-21 at 6.48.37 PM.jpeg [ 35.11 KiB | Viewed 25799 times ] |
| HPE Storage Users Group https://3parug.net/ |
|
| Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 https://3parug.net/viewtopic.php?f=18&t=3271 |
Page 1 of 2 |
| Author: | dockerd [ Wed Aug 21, 2019 4:57 am ] |
| Post subject: | Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
Hello guys i have 3par 8400 and i want to upgrade OS my current os it's 3.2.2 mu6 without any patches and i have some questions is it possible to upgrade from 3.2.2 mu6 directory to 3.3.1 mu3 ??? what is procedure to upgrade ??? |
|
| Author: | ailean [ Wed Aug 21, 2019 6:03 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
Last one we had was from 3.2.2eMU4 to 3.3.1MU3, on top of what ever patches we already had they had to add P84 P92 P94 P98 P113 P118 P127 before starting the 3.3.1MU3 update. Some of those maybe included in MU6 but chances are they'll at least be a few extra minimum patches to apply before they can do the upgrade. Support will give you a list of the current ones when you request the upgrade, also I think 3.3.1MU3 still isn't the 'default' level for 8000 arrays so it takes some arm twisting to get them to go above 3.3.1MU2. |
|
| Author: | dockerd [ Wed Aug 21, 2019 7:04 am ] | ||
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 | ||
in this situation i must install patches for 3.2.2 MU6 is ? and with any patch i must start install please explain the attachment photo
|
|||
| Author: | MammaGutt [ Wed Aug 21, 2019 8:50 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
3.2.2 MU6 P99 does not obsolete any other patches. That's what is states and that's what it means. |
|
| Author: | dockerd [ Wed Aug 21, 2019 9:08 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
Ok is possible to install latest patch from 3.2.2 mu6 to 3.2.2 mu6 p140 ??? |
|
| Author: | ailean [ Wed Aug 21, 2019 9:31 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
I think the minimum is likely to be 3.2.2 MU6 + P99 + P119 + P122 + P131 + P135 + P138. They are all listed as the "Mandatory Upgrade Pre-requisite" patches currently. Once they are done it's the SP 4.5 upgrade, then the 3.3.1MU3 upgrade, then the SP 5 upgrades till you get to 5.0.5.1 I think and then a bunch of post 3.3.1MU3 patches. |
|
| Author: | dockerd [ Wed Aug 21, 2019 2:44 pm ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
Ok thank you , i have more questions, Does the patch update need to reboot controller node ? Can I update from one patch to another directly on the same day ? |
|
| Author: | ailean [ Thu Aug 22, 2019 4:20 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
P patches don't need node restarts and can we installed one after the other okay, some have dependencies so the order installed can matter and some require running commands at the CLI after to finish and check they completed (the release notes will say so if required). Version changes (e.g. 3.2.2 -> 3.3.1) or MU installs (e.g. 3.3.1MU1 -> 3.3.1MU2) do require node reboots. One node at a time and recommended to use the pause option so you have time to check hosts have reconnected to the rebooted node okay before doing the next in an online live environment. There are also offline methods that can update/reboot all nodes at the same time but we've always been in a live environment with our 3PARs. 
|
|
| Author: | feldsam [ Mon Aug 26, 2019 3:52 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
Hello, if you are live, then you should upgrade from system patched with all available patches. If you are not live, then you can upgrade directly. I have experience upgrading from 3.2.2 MU4 with only some patches installed directly to 3.3.1 MU3 without any problems. |
|
| Author: | dockerd [ Mon Aug 26, 2019 11:26 am ] |
| Post subject: | Re: Hpe 3par 8400 OS upgrade from 3.2.2mu6 to 3.3.1 mu3 |
Code: P patches don't need node restarts and can we installed one after the other okay, some have dependencies so the order installed can matter and some require running commands at the CLI after to finish and check they completed (the release notes will say so if required). Ok. Do patch update need any pre-requisite except patch dependencies such cpu and memory utilization less than 50% , stop all task , stop all activity and disconnect any ssmc sessions ??? Code: Version changes (e.g. 3.2.2 -> 3.3.1) or MU installs (e.g. 3.3.1MU1 -> 3.3.1MU2) do require node reboots. One node at a time and recommended to use the pause option so you have time to check hosts have reconnected to the rebooted node okay before doing the next in an online live environment. Ok. What you mean by pause options ??? Thank you so much |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|