HPE Storage Users Group https://3parug.net/ |
|
Upgrade hangs at rebooting node0 from 3.2.1MU4 to 3.3.1MU2 https://3parug.net/viewtopic.php?f=18&t=3092 |
Page 1 of 1 |
Author: | glanzmann [ Tue Feb 05, 2019 7:31 am ] |
Post subject: | Upgrade hangs at rebooting node0 from 3.2.1MU4 to 3.3.1MU2 |
Hello, when trying to ugprade from 3.2.1MU4 to 3.3.1MU2, the update hangs after trying to reboot node 0. But the node never got booted: Quote: 2019-02-05 10:05:48 CET Substituting package for staged 2019-02-05 10:05:48 CET Beginning upgrade of system software. 2019-02-05 10:05:48 CET 2019-02-05 10:05:48 CET Extracting... 2019-02-05 10:06:01 CET ..| 2019-02-05 10:06:01 CE 2019-02-05 10:06:01 CET Applying new package... 2019-02-05 10:06:02 CET Calculating checksums... 2019-02-05 10:06:11 CET Performing pre-update checks... 2019-02-05 10:06:18 CET Distributing package to all nodes... 2019-02-05 10:06:26 CET ..tar: tpdpackage: time stamp 2019-02-05 10:06:02 is 41.051967933 s in the future 2019-02-05 10:06:27 CERunning preupdate scripts... 2019-02-05 10:06:28 CET Installing base filesystem 2019-02-05 10:06:42 CET Installing to partition: 3 2019-02-05 10:06:46 CET Installing software... 2019-02-05 10:07:53 CET IDE disk of node 0 updated successfully. 2019-02-05 10:07:53 CET IDE disk of node 1 updated successfully. 2019-02-05 10:07:53 CET Update complete. 2019-02-05 10:07:53 CET 2019-02-05 10:07:53 CET Update successful. 2019-02-05 10:07:54 CET Checking if the system is healthy enough to proceed... 2019-02-05 10:07:55 CET 2019-02-05 10:07:55 CET 2019-02-05 10:07:55 CET The current system configuration is valid for proceeding with an online upgrade. 2019-02-05 10:07:56 CET 2019-02-05 10:07:56 CET 2019-02-05 10:07:56 CET Rebooting node 0. Any ideas? I already opened a case and keep this thread updated. Cheers, Thomas |
Author: | MammaGutt [ Tue Feb 05, 2019 7:58 am ] |
Post subject: | Re: Upgrade hangs at rebooting node0 from 3.2.1MU4 to 3.3.1M |
I'm guessing one of four. 1. Node0 rebooted, management interface failed over to node1 which for some reason is connected to the wrong VLAN or something resulting in the SP no longer being able to connect to the 3PAR. 2. Node0 rebooted, failed and is down. 3. Node0 rebooted but for some reason is unable to rejoin the cluster. Using the update tool is checking and fixing some of these issues so if the update tool was used this is unlikely. 4. System crashed during upgrade and 3PAR is down. |
Author: | glanzmann [ Tue Feb 05, 2019 8:29 am ] |
Post subject: | Re: Upgrade hangs at rebooting node0 from 3.2.1MU4 to 3.3.1M |
Hello, node0 has not rebooted. Since we're still logged in via SSH. However most commands hang. But I can issue a upgradedsys -getlog which shows the above. showalert and showtask. No tasks are active. In the alerts it says that an upgrade is in progress. Cheers, Thomas |
Author: | MammaGutt [ Tue Feb 05, 2019 8:37 am ] |
Post subject: | Re: Upgrade hangs at rebooting node0 from 3.2.1MU4 to 3.3.1M |
I'm guessing as commands hang you can't do "shownode" ... What about "statport -host" traffic on everything? If node0 hasn't rebooted then I'm guessing you're not in the worst shape. Probably some management service hanging (sysmgr?) so support could probably cancel the upgrade and restart the service and get back to square one. |
Author: | glanzmann [ Tue Feb 05, 2019 11:09 am ] |
Post subject: | Re: Upgrade hangs at rebooting node0 from 3.2.1MU4 to 3.3.1M |
Hello, with the help of a forum member I resetted node 0 using a console cable. Afterwards I could do a upgradesys -abort and started from square one. But now I go a different path: Quote: [x] SP 4.4 MU6 [x] 3.2.2 MU6 [x] SP 4.5 MU4 [ ] 3PAR_SW_Upgrade_Tool_U018_QR482-11389.iso [ ] 3.3.1 MU2 [ ] SP 5.0.4 [ ] P30 [ ] P32 [ ] P34 [ ] P37 [ ] P38 [ ] P39 [ ] P40 [ ] P41 [ ] P42 [ ] P45 [ ] P48 Still waiting for HPE support to call me back. Cheers, Thomas |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |