HPE Storage Users Group https://3parug.net/ |
|
SSMC 3.4.1 connecting to InfoSight https://3parug.net/viewtopic.php?f=18&t=3079 |
Page 1 of 1 |
Author: | koopa79 [ Thu Jan 10, 2019 4:44 am ] |
Post subject: | SSMC 3.4.1 connecting to InfoSight |
Guys, I can't seem to find a guide anywhere. I want to add our new SSMC 3.4.1 server to infosight, but i don't really like giving servers full internet access. Any idea if its just port 443 (inbound / outbound) and if so is there a list of IP's i can allow access to so this isn't open for everywhere Thanks |
Author: | cali [ Thu Jan 10, 2019 5:02 am ] |
Post subject: | Re: SSMC 3.4.1 connecting to InfoSight |
https://infosight.hpe.com should be enough |
Author: | koopa79 [ Thu Jan 10, 2019 6:00 am ] |
Post subject: | Re: SSMC 3.4.1 connecting to InfoSight |
do you know if that's outbound from the server? Is inbound required from infosight? |
Author: | cali [ Thu Jan 10, 2019 7:53 am ] |
Post subject: | Re: SSMC 3.4.1 connecting to InfoSight |
SSMC pull the Infromation from InfoSight. SPOCC push the Information to InfoSight. But you need both directions, because SSMC need to Login in InfoSight. |
Author: | koopa79 [ Thu Jan 10, 2019 10:13 am ] | ||
Post subject: | Re: SSMC 3.4.1 connecting to InfoSight | ||
So i have infosight connected as shown in the screen shot, but that is only with outbound traffic. The problem is none of my 3pars are currently at the level o/s to accept infosight analytics yet (lots of 3.2.2 MU2 & MU3) We should be upgrading them soon, so i thought if this was in place then i'd start getting better reports at a later date once upgraded. Are yous hould it also needs inbound, if so i'll raise a change internally to give it access internally from insight Thanks
|
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |