HPE Storage Users Group https://3parug.net/ |
|
Unable to connect Inserv to Service Processor https://3parug.net/viewtopic.php?f=18&t=2800 |
Page 1 of 1 |
Author: | kurbennett64 [ Thu Feb 15, 2018 11:50 am ] |
Post subject: | Unable to connect Inserv to Service Processor |
Hi all, I upgraded the Service Processor to v5 and the 3PAR to 3.3.1. I am trying to add the 3PAR to the Service Processor and get an error during the connect process: 3parsvc is not accessible com.tpd.inform.data.exception.TPDOperationException: Password must be at least 15 characters long. The account does exist on the 3PAR and the password is at least 15 characters. Any ideas? Thanks Kurt |
Author: | Richard Siemers [ Mon Feb 19, 2018 2:15 pm ] |
Post subject: | Re: Unable to connect Inserv to Service Processor |
Usually HPe does all of that work for us, install and upgrades, so I have no personal experience with that. I do recall that our initial setup was done with 3PARADM not SVC. |
Author: | cali [ Tue Feb 20, 2018 5:39 pm ] |
Post subject: | Re: Unable to connect Inserv to Service Processor |
Change the admin password on the SP to 15, not on the 3PAR. Reboot SP. |
Author: | sjm [ Wed Feb 28, 2018 9:35 pm ] |
Post subject: | Re: Unable to connect Inserv to Service Processor |
The accounts have changed and also as part of this process HPE upgrade team had to generate new passwords for SP and inserv connectivity. After this admin replaces 3parcust with same password and two new accounts hpepartner and hpesupport 3paradm is still vaild. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |