HPE Storage Users Group https://3parug.net/ |
|
Moved 3PAR unsure how to re-ip nodes https://3parug.net/viewtopic.php?f=18&t=2793 |
Page 1 of 1 |
Author: | jbguy [ Wed Feb 07, 2018 2:56 pm ] |
Post subject: | Moved 3PAR unsure how to re-ip nodes |
Good afternoon all. We moved our 3par to a new location but aside from the service processor im not 100% sure how to reip the nodes themselves so they can talk and be seen by the physical service processor. Am I missing something as to how to do that? I havent been able to find any documentation on it. |
Author: | jbguy [ Wed Feb 07, 2018 3:24 pm ] |
Post subject: | Re: Moved 3PAR unsure how to re-ip nodes |
FYI I have this for setting the Service processor ip 1. Set the new IP and netmask setnet startaddr <old_IP> <new_IP> <new_netmask> 2. Set the new gateway setnet startgateway <new_gateway> 3. Commit the changes setnet finish [-f] |
Author: | MammaGutt [ Wed Feb 07, 2018 4:03 pm ] |
Post subject: | Re: Moved 3PAR unsure how to re-ip nodes |
That is the commands for the 3PAR itself, not the service processor. |
Author: | jbguy [ Wed Feb 07, 2018 4:36 pm ] |
Post subject: | Re: Moved 3PAR unsure how to re-ip nodes |
MammaGutt wrote: That is the commands for the 3PAR itself, not the service processor. ah ok, is there a good reference for that i can look at somewhere? not really sure how best to proceed . Would SPOCC be best for the SP itself? Console cable in? |
Author: | MammaGutt [ Wed Feb 07, 2018 5:01 pm ] |
Post subject: | Re: Moved 3PAR unsure how to re-ip nodes |
For 3PAR, CLI or SSH. For SP I think you can use both web, ssh and console(very nice if virtual). I've only used console. As for reference, you have the CLI reference for 3PAR, sounds like a good match |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |